Head Up Display OBD2+GPS Smart Gauge Car HUD Speedometer Turbo RPM Alarm for Car Truck

Features

Much more cool than others. As the flux water change the color with your driving speed, the LED lighting will show your mood. Blue for normal and red flashing for alarm. You can add the time on the lower right corner of the head up display.

Much more functions than others. This head up display is with powerful functions. Data displayed in OBD mode: speed, water/oil temperature; voltage; fuel consumption; RPM; simple mileage; driving time; quantity of satellites; altitude; time; air‑fuel ratio; turbine pressure; acceleration test; brake test; data flow; clearing the fault code,ect. You can make DIY selection on 9 modes as you wish.

Much more adaptable than others. The OBD2 and the GPS mode can be displayed on the same interface. You can customize small icons as you need. Data displayed in GPS mode: speed; voltage; driving time; altitude; number of satellites; driving direction; simple mileage,ect. You can switch unit between miles and kilometers, switch unit PSI and Bar, 100KPA.

Much more powerful than others. As 2020 upgraded HUD display and car OBD and GPS dual system, it adopts specifically more advanced technology. We have added 10 more OBD2 protocols to improve our compatibility, which makes our products fit 98% cars.

The OBD2 is compatible with European cars after 2005 and cars of other regions after 2008. The GPS mode fits all vehicles(If your car is not OBD compatible, you can use GPS mode). If you are not sure about the compstibility of your car, please confirm with us before purchase.

Specification

Item Type: Head Up Display

Material: Electron

Working Voltage: 11V-18V （Please use USB cable for cars whose voltage are higher than 24V）

System: OBD2+GPS

Screen Size: 3inch

OBD Mode Function:

Display Information: Vehicle speed, water temperature, voltage, fuel consumption, rotational speed, single mileage, total mileage, travel time, driving direction, number of satellites, altitude, time, intake pressure, oil temperature, air-fuel ratio, turbine pressure, acceleration test, brake test, fault code clearing , data stream reading

 

Alarm: Overspeed alarm, overhigh rotational speed alarm, water temperature alarm, voltage alarm

GPS Mode Function:

Display Information: vehicle speed, voltage, satellite time, altitude, number of satellites, driving direction, single mileage, driving time, acceleration test, brake test

Alarm: Overspeed alarm, low voltage alarm

Installation Notes:

1. Before installation, you need to prepare LCD instrument and OBD cable.

2. Find the car OBD interface and connect the OBD cable to the meter.

3. Start the engine, then turn on the power switch.

4. The meter is powered on for self-test and displays the startup screen. After the self-test is completed, it enters the working interface and the installation is completed.

5. Tear off the adhesive film at the bottom of the LCD meter, and choose a suitable position to fix it according to the individual's line of sight.

Package List

1 x Host

1 x OBD Line

1 x USB Cable

1 x Small Crowbar

1 x Manual

1 x Double-Sided Tape

1 x Suction Cup Bracket

1 x Screwdriver